Ph Tester Family model

1,600.001,800.00 (-11%)

In stock

  • Slim, ergonomic design with rounded edges and a case that is only 17 mm (0.7 inch) thick, the HI98107 is thin and fits comfortably in the hand or pocket
  • Large Multi Level LCD: The LCD is 29 mm (1.125 inch) x 20 mm (0.81 inch) allowing the user to easily read both the pH and temperature simultaneously
  • Two-Button Operation: One for on or off, the other for calibration
  • Integrated Temperature Sensor: Built in temperature sensor allows for temperature compensated measurements
  • Temperature can be displayed in either degree Celsius or degree Fahrenheit
  • pH range 0.0 to 14.0 pH
  • pH resolution 0.1 pH

The ph Meter tester features a large multi level LCD which displays both pH and temperature readings simultaneously. The pH readings are displayed with a 0.1 pH resolution and with an accuracy of ±0.1 ph. The pH range of the HI98107 is from 0.0 to 14.0 ph. An exposed temperature sensor allows for rapid automatic temperature compensated pH measurements. Temperature can be set to display in degree Celsius or degree Fahrenheit. The LCD screen has stability and calibration tag indicators. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available. The pH electrode uses a unique reference cell design that utilizes an extractable cloth junction. A clogged junction will typically exhibit erratic readings that will not stabilize. Simply extracting a small portion of cloth from the meter will clear any clog by exposing a fresh, clean surface. The ability to clear any clogging will extend the life of the pH electrode. Calibration is performed by pressing the dedicated calibration button. Once in calibration mode the pH electrode can be calibrated to 1 or 2 points using the pre-programmed standard buffers (pH 4.01, 7.01,10.01). When the standard value is recognized and stability is reached, the meter automatically accepts and stores the calibration value. Setup options include automatic shut off timing and temperature unit displayed. Automatic shut-off options are to turn the meter off after 8 minutes, 60 minutes or disabled. To enter the setup mode the user presses a button located in the battery compartment.

Additional information

Weight 0.5 kg
Be the first to review “Ph Tester Family model”

Your email address will not be published.

Reviews

There are no reviews yet.

Main Menu

Ph Tester

Ph Tester Family model

1,600.001,800.00 (-11%)

Add to Cart