100 GPD Membrane | Membrane 100 GPD | Membrane Uniglobalbusiness

HYDRO MEMBRANE 100 GPD

578.201,758.20 (-67%)

Out of stock

? 18+ Liters Flow Per Hour
? Works till 3000 TDS
? 100 GPD Membrane
? High Flow Membrane
? Consistent Performance
? Specially designed for HIGH TDS
? Minimum Failure Ratio
? Attractive Box Packing
? Dry Sheet Membranes
? 100% Imported Membrane

Category:

Reverse osmosis (RO) and Nanofiltration (NF) membranes are commonly used as a filtration method to remove many types of dissolved solids (large molecules and ions) from solutions by applying pressure to the solution when it is on one side of a selective membrane. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side.

Most commonly used RO membranes are typically composed by a thin film composite membrane consisting of three layers: a polyester support web, a microporous polysulfone interlayer and an ultra think polyamide barrier layer on the top surface.

Reverse osmosis (RO) is a water purification process that uses a partially permeable membrane to separate ions, unwanted molecules and larger particles from drinking water. In reverse osmosis, an applied pressure is used to overcome osmotic pressure, a colligative property that is driven by chemical potential differences of the solvent, a thermodynamic parameter. Reverse osmosis can remove many types of dissolved and suspended chemical species as well as biological ones (principally bacteria) from water, and is used in both industrial processes and the production of potable water. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be “selective”, this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as solvent molecules, i.e., water, H2O) to pass freely.

Reverse osmosis differs from filtration in that the mechanism of fluid flow is by osmosis across a membrane. The predominant removal mechanism in membrane filtration is straining, or size exclusion, where the pores are 0.01 micrometers or larger, so the process can theoretically achieve perfect efficiency regardless of parameters such as the solution’s pressure and concentration. Reverse osmosis instead involves solvent diffusion across a membrane that is either nonporous or uses nanofiltration with pores 0.001 micrometers in size. The predominant removal mechanism is from differences in solubility or diffusivity, and the process is dependent on pressure, solute concentration, and other conditions

Additional information

Weight 0.2 kg

Main Menu

HYDRO MEMBRANE 100 GPD

578.201,758.20 (-67%)